![]() |
My HM-HDS1
Repair story (how sad is this?)
|
As I am currently a novice at repairing this beast, I can only tell you the barest of info about it. Suffice to say, I've had to strip mine down a couple of times to repair various faults. Fortunately, I've had a lot of assistance from people around the world with regards to the schematics and other technical information. Thanks to Andrew Wilkinson for his invaluable help here.
One thing to bear in mind: UNPLUG the
unit from the mains before you start plugging and unplugging boards, cables and
connectors inside the unit. I blew up a PCB fuse when plugging in the hard drive
with the unit on standby mode.
I started investigating the possibility of repairing my unit after accidentally
destroying part of the code on the hard drive. All I was doing was cleaning the
SVHS tape heads and something went 'click' loudly inside the unit.
From then on, I was unable to get reliable 'delayed live TV'. Upon booting, the
unit would just display a black screen with the JVC logo in the middle. I
discovered that if I removed the HDD, turned the unit on, let it do its power-on
test, then power off, reconnect the HDD and turn it on, it would occasionally
work for a while.
This was getting a bit tedious, so I embarked upon a quest to find a replacement
drive and a new HDD image. Luckily, Andrew had just been contacted by another
HM-HDS1 user in the Netherlands: Geert Jan Laanstra. He had bought a second-hand
unit and started decompiling all the HDD code and EEPROM contents. I was able to
download a Ghost image from him and successfully copy it to a new identical
drive. At the time of writing, this has cured the problem.
The moral:
It was a lot of hassle, but I learnt a lot and JVC
would have charged me nearly £200 for that privilege!
| Technical Home | Guestbook | Forums | Home |